Another day of outdoor op's

The view from my other spot along the lake

I had the day off work today and it was another amazing day up this way for fall so I headed outdoors again with my KX3. This time I was out and about in the morning and was expecting 20m to be shut down and possible 40m opened up. I found 20m was open and never ended up checking 40m at all. Once again I headed toward the lake and this time my "spot" was taken with someone who also was taking advantage of the great weather. I was watching the weather forecast this morning and it looks like "seasonal reality" is going to set in very soon! This time I set up a little further along the lake at a picnic table. Today I was happy to make 3 CW contacts:

1. WA5OVB Phil's IC 7200 was doing a great job picking up my portable signal I gave Phil 579 report and I was given a 569 with some QSB.

The Chameleon CHA P antenna setup

2. KW7D Paul's signal was strong, he was in New Mexico where the weather is much more pleasent than it is going to be up this way. Paul was calling CQ and I was able to catch his attention with my portable signal.

3. K3PR is Joes call and we had a nice long QSO exchanging as much info as we could. At first my signal was in around a 229 but conditions changed and I moved up the scale to 559! Joe and I had a nice QSO about antennas, rigs, WX and just what we were up too.

I did hear a station 4U1A the United Nations in Austria and when I first heard their CQ call they had not been spotted and I was trying to get their attention from my portable setup. I did not have any luck and even less luck after they were spotted and the pileup began.

Things pack up very nicely. 

I just can't believe the weather we are getting for it being half way through October. The temperature today was 22C with clear skies and just a gentle breeze off the lake. This is a great time to grab the KX3 and head out for some portable op's. I check the contest calendar to see what was happening in the way of CW contests. I found the NYQSO party and Worked all Germany (WAG) contest were going to be in full swing the same time I was out. I checked to see what the contest report was supposed to be, contesters can add lots of contacts to a portable op. I set up beside the lake (Lake Ontario) with a nice breeze and in the shade as the sun was out and I did not want to overheat. I made 20m my band of choice and it so happens that it was alive with WAG contesters. The band was in great shape and lots of German stations looking for DX stations to fill their log! I was using my Elecraft KX3 at 10 watts and my Chameleon mag loop antenna. I was set up in 10 minutes and on the air searching the band for contacts. I was on the air for about an hour and had the following contacts:
DF0DW           WAG contest
IQ1GE             DX calling CQ

DJ0SP              WAG contest
DL5HIA           WAG contest
DF8AA            WAG contest
W2RR              NYQSO party
DJ6OZ             WAG contest
DL0DA            WAG contest

As you can see the WAG contest dominated the bands and it turned out the NYQSO party participants were just not making it over the German WAG contesters. I did not include the signal reports in the above list as it was a contest so the standard 599 was sent. I knew I was no were close to 599 as the German stations asked on more than one occasion for a repeat.

Flight of the Bumble Bee QRP contest

Setting up 

This is the first (but not last) year I participated in this contest, I have Larry W2LJ to thank as his blog posts regarding this contest inspired me. Both Julie and I made plans for this day, for me it was contesting and she hauled along all her cameras and gear and had a blast with her hobby photography.  The weather was fantastic with it being 31C in the shade but we were right on Lake Ontario with a nice breeze off the lake made it pleasant. I operated from Humber bay shores park which is just outside our condo. We brought along camp chairs and a portable table as we knew the park would be very busy and finding a picnic table would be out of the question. The contest started at 1pm local time which gave Julie and I time to pick out something to eat. (fruit crepes with maple syrup) Once we found our spot in the park and setup we sat and enjoyed the crepes as one has to fuel up before the contest.

The view from the op table

The rig I used was my Elecraft KX3 on external battery power, the antenna was the Chameleon CHA P mag loop antenna and my key was the Palm mini paddle   I was very happy with the Chameleon CHA P antenna, it only took me 5 min's to setup. It was very easy to tune but it was not until 1/2 way through my outing that I realized the KX3 had the preamp off! Once I put the preamp on finding the noise peak was much easier. I was very pleased with the setup and performance of the antenna. I was only able to operate for 2 of the 4 hours of the contest as Julie and I had dinner guests we had to be back home and prepare for. I only operated on 20m as this band was open and the QRP contacts were being heard. I was pleased that I made 11 contacts and I did have about 5 folks stop and ask questions about what I was doing. One gentleman told me that his dad was a ham and one of the young people that stopped told me she read about morse code in her history class! The band was in great shape and I was able to hear and work QRP stations all over the U.S. I made 2 contacts into New Jersey and for some reason I have never in the past made it to that state when doing portable field op's. I really enjoyed this contest and am looking forward to it next year.

Setting up the loop

The outdoor shack.

Chameleon CHA P 

Fuelling  up before 

Skunked on my day out.

The setup in the car

The CHA P loop 

On Saturday wife and I had some errands to do in the town we used to live in, it's about an hours drive from were we are now. Julie had an appointment that would last for approximately 2 hours so I felt bringing the Elecraft KX3 would help pass this 2 hour time slot. I brought along my new loop antenna from Chameleon CHA P loop antenna . (A review of this antenna is coming soon) The weather was great and I had my spot preplanned out, it was along a river that flowed through town and there was a nice picnic table there that I have used in the past. Once I dropped of Julie for here appointment it was off to the river, I found there was a wedding shoot going on and the table was not gone! I then had to scope out a new spot which did not take long. The new spot was in a parking lot at the entrance to a park, not the same view as the river side setup but it will do. I was keying out CQ for about 1.5 hours with no answers but I did hear some stations but they were already in QSO's. I did check the Reverse Beacon Network to make sure my CW signal was getting out and it was, the conditions were good as well but I guess it was just time for me to give my CW fist a workout. As always Murphy seems to make his visit at least once on my outings. On this day Murphy decided to make my CW operations a bit more challenging. For a long time I have been using the Palm Radio's Mini Paddle. I find this paddle to be very smooth and very well made. A number of years ago the folks at Palm Radio sent me their newly revised cable that goes from the rig to the paddle. It was lighter and more easy to work with and a great improvement over the more bulky cable that was being used in the past.  I have owned this cable for about 5 years without any issues until yesterday on my outing. The end that plugs into the paddle had come apart, the two parts are held together by a screw. I thought at the time I just failed to check the screw and it came loose. I did not have a mini screw driver with me so I had to very carefully plug the connector into the key. Once I got home and upon closer look I realized the connector was broken and the only choice I had was to glue the two pieces together. I did this and it worked fine but in the end this is a one time fix. Overall I made no contacts but it was nice to get out and just have the enjoyment of getting on the radio and it's very relaxing.

Reverse Beacon Network

The broken connector 

A fast cool trip to the park

Starting out on my cool walk

CHA P-Loop antenna

I had the day off work today and it looked very nice outside, the sky was clear and the sun was out. I wanted to take this opportunity to test out my new portable antenna. I packed up my Elecraft KX3, batteries, key and my new Chameleon CHA P-Loop antenna. This post is not a review of the new antenna before I do that I want to try out the antenna several times. Before heading out I did not check the propagation reports, I find if I do this and they are poor it casts a shadow over the outing.As I was saying the day from inside the house looked nice but once out there was a cold wind off the lake, it felt like a cool fall day and not spring. Anyway.....because of the poor weather, my lack of warm clothing I quickly setup the antenna, checked out how it tuned on 10, 15, 20 and 30m and gave a few CW CQ's. With no answers and the wind picking up I was satisfied the antenna at least worked.

My setup 

Do they have to be LOUD to work them????

Learning a QRP lesson

I took advantage of another portable mobile QRP day again on Saturday. Once again using my Elecraft KX3, mono band HF whip antennas and QRP power. I decided right off the get go to use 20m whip antenna and I found there was a few CW contests going on. This is great as it gives me an opportunity to make some contacts......so I thought. I chose this day to cruise up and down the band for stations calling CQ and not CQ contest. I have been doing some reading in my spare time about QRP operation and making contacts. One of the tips I read I was actually able to put into practice and make a DX contact only using 5 watts with a mobile whip antenna. I was starting my run up the 20m band and at 14.007 I heard a very faint station calling CQ. I narrowed down my KX3's filter to around 200 Hz and he was still in and out, I was not able to pick out his full call as yet. When he started to call CQ again I turned the audio peak filter (APF) and started to fine tune his signal. Then low and behold I was able to get his call RA3XM, he was DX but what were my chances of making the contact???

1. He was in and out right at the noise floor.
2. He was not at the QRP watering hole so he was running most likely some kind of QRO power.
3. What chance did my QRP 5 watt signal have if I could barely hear QRO signal?

When RA3XM stopped calling CQ I threw my call out there and can you believe he came back to me on my first call!! I was shocked that I made the distance, it was not a long QSO but I did get a 559 signal report and I passed along to him a signal report, my name and that I was running QRP. It became crystal clear to me of something I read on more than one occasion from seasoned QRP op's....you may come across signals that are in and out of the mud, don't short change yourself ( I have done so on many occasions) thinking "they are QRO and in the mud they are never going to hear my peanut signal. Instead throw your call out there and you may be surprised......and when RA3XM came back to me from the noise I was surprised and pleased to make the contact. Spinning the dial once again I hear AN400R booming in (Spanish special event station) I gave him a call and and made that contact as well.  On this outing it was not as simple as calling and making a contact there was F6EJN, DK7OB, AN400C, IT9RZU, MI0GH and AN400C all who I called and was not heard. A valuable lesson was learned on this outing.....even if the station calling CQ is in the mud give them a call and you (I was) may be surprised they come back to you.

Portable QRP operations in the park.

Hunting for that one contact

In Canada it's the Thanksgiving long weekend and I thought I would add Friday as a vacation day to make it an extra long weekend. The weather has been great all week very summer like and far from fall like. I decided to take advantage of this fine weather and get outdoors with ham radio! This time it was going to be our local park with my car, so instead of the Endfed antenna My plan was to warm  up the mono band HF whips. Apon arrival in the park I check with the website "band conditions" and it was showing all green on 30m. I thought "what the heck" I setup and the band was dead! I checked with band conditions again and low and behold the band was now deep on the red. It was off to the standby band.......20m. Going up and down the band I did find it quite but with the hurricane riding up the Eastern U.S. , it's Friday and lots are working and then the band conditions not idea the slow band made sence. I came across a station calling CQ at 14.041 followed by "up". Hmmm I thought....dxpedition or rare call. I engaged the dual watch on the KX3 and I listened for a bit and found there was no pile up in fact there was no one calling him! The call was AN400M that to me seemed like a special event station but at this point I was not sure from where? I set my KX3 for the common split of 2K and threw my call at 5 watts out there. He came right back to me with the standard 599 to which I replied the same adding TU and 73.  From there I was just spinning the VFO around 20m and really did not find much. I did come across 2 other stations signing AN400G and AN400I and that convinced me I contacted a special event station. I tried calling these other station but was not able to make the contact. It was then time to pack it up as there was a Blue Jays game to watch at 1pm today. While at the local watering hole waiting for the Blue Jays game to start I went on   QRZ.COM to find out it was a special event station out of Spain. They were offering a silver, gold and platinum awards but I was not able to get on their website it was not loading so I was not able to get anymore info.

A great day for portable op's.

View from the portable op's position. 

It was another amazing day weather wise up this way and with winter soon coming I wanted to hit the trail again with the KX3. I was up and out around 10 am local time and off to search out on my bike a nice spot on the lake to operate. (Lake Ontario) The spot I found was right at the lake and I could see the police boats setting up their perimeter for the air show that would be happening around noon. I planned to be done my portable op's before the air show starts, the noise of the low flying jets (which is a very cool sound by the way) drowns out my CW coping skills. I set my endfed antenna in a sloper configuration as I found the inverted V was just not doing the trick. The CW open contest was in full swing and that sure was a bonus for making contacts. I checkout the Contest rules and they were looking for a serial number and name. I was able to make 8 contacts in the contest:
N4OX on 20m from FL
AF4RK on 20m from FL
K5WK on 20m from MS
N6ER on 20m from CA
KZ5D on 20m from LA
N5XZ on 20m from TX
W9ILY on 40m from IL
AA3B on 40m from PA
N8BJQ on 40m from OH
I found the contacts on 40m were no repeat backs and all the info was conveyed on the first try. As for 20m I was asked for repeats on my call, name and serial by most if not all the contacts. I raise the output of the KX3 to 10 watts and the external power supply seemed to handle it just fine.

An afternoon in the park.

The park setup

With the fall fast approaching which signals colder weather that is just around the corner and with that an end to outdoor op's for another year I decided to get outside today. It's a long weekend up this way with Monday being a holiday. I decided to use up some of my time off and took Thursday, Friday and Tuesday off as well. I went to our local park this afternoon and with it being a work day I did not find it too busy there I was able to get a nice spot under a shady willow tree. My first setup was an inverted "V" configuration. I was out last weekend and used the same configuration and was not spotted anywhere on 20m or 40m. I was reading this week that it's best to setup the inverted "V" with an angle greater than 90 degrees. I was not sure if that was my issue last weekend  but I decided to try again today but making sure my angle was greater than 90 degrees. I ended up having the same results with no spots. I then changed it up to a sloper configuration and I was able to contact K8DSS from Florida on 20m. Ed gave my 5 watt signal a 539 and I was happy with that but for the day that was all I had time for. It was soon time to pack things up and head home. While in a QSO with Ed his CW signal was in competition with practicing air show jets ( CF-18's and FA-18's) and the jets were

New power config

winning!  During the summer I have had on to many occasions battery issues. I have had AA cells in the KX3 not last more than a 1/2 even after a full charge. I have a Tracer lithium Polymer power pack that is an 8Ah pack. I decided to purchase the same item again and parallel the two 8Ah packs. This gives me a solid 16Ah's of power and a nice steady 12 volts. I have been using this arrangement for the summer and am very pleased with the performance.

If at first you don't succeed try try again!

Well here we are once again trying to get the portable ham radio setup going. My first attempt was to place one of my mono band whips on my bike and set out a counter poise. It was with mixed results, the SWR was sometimes all over, there was a TX error message now and again on my KX3 and basically frustration trying to get it to work. So if at first you don't succeed try try again. Last week I was online searching again for another way to get my portable op's on the air. I was looking for something that was easy to deploy, was portable and worked! My interest has gone toward the Endfed  antennas. I was looking at LNR's antennas and then I came across the Endfed 40-6m antenna by Steve W1SFR. I shot him some questions regarding the antenna and he got back to me right away with the answers. His Endfed seems to be very well built using Wireman "silky" 18 gauge wire which I have used in the past and been very happy with. There was a nice noticeable quality in both the wire connections and the 9:1 unUn. The antenna is only 35 feet but you do need about 25 feet of coax to act as a counter poise. Also your rig needs to have an antenna tuner (mine does) to get the benefit of 6m-40m with only a 35' antenna and no traps. Also it was nice to see on his web site a link to purchase his antenna including shipping to VE3 land. The shipping was super reasonable the total came to 67.00 U.S. Steve also mentions that his price includes handling as well. Other sites I had gone to being very interested in their antenna to only find out the shipping at times was either 1/2 or more of the price of the antenna. There was lots of positive reviews on Eham about Steve's antenna  as well. I put some items I am not using in the shack sold them very fast and the funds were in place so I have placed my order and waiting for it to arrive. I have the 25' of coax on hand but I do have to head out to the hardware store for some rope 1/8" nylon rope. Then I'm thinking of placing a water bottle with some sand it it as a weight to get the rope up and over a tree branch.....that is going to take some practice!

A slight change of plans.....

The test setup 

I was out today once again with my portable operations but this time there was no on air time it was time to test and decide. I went out with my MFJ antenna analyzer, mobile whip antennas and various lengths of counter poise. I wanted to see where my 20m mobile whip antenna was resonant and using the MFJ analyzer was the easiest way of doing this. The counter poise for 20m I started with was 17.5 feet long and the SWR was not showing it was resonant in the CW portion of the band but in the SSB section. So I found I have to lengthen the counter poise to 30 feet to get the SWR to 1.2:1 in the CW portion of 20m. This got me to thinking if the mobile whip was the way to go, I did have these antennas hanging around and I wanted to give them a go to see what results I would get. They are still very useful to me when I operate portable mobile from the car and they preform very well in that situation. I wanted to try the whip  antenna as I felt it would be a very small footprint of an antenna but with a counter poise of 30 feet the footprint is larger than I would like. From most of my blog reading about portable trail operation, NPOTA operations and just plan old out in the park for the day operation hands down most of the time the antenna of choice was one of LNR's par end fed antenna's.   I have looked over the antennas at LNR Precisions site and not sure yet which antenna to get, I am leaning toward the EF-20 as it's not as long (33') as say the other models. I'm really not going to use 40m and I figure (but not sure) I can use the Elecraft KX3's tuner to operate 15 and 10M?? Any feedback about this antenna or others would be appreciated.

A great weekend for portable op's

The setup by the Lake 

This past weekend the weather was great and the propagation seemed to be fair. So that meant it was time to take the Elecraft KX3 along with my bike and hit the trails again. I went out on Saturday and Monday (It was a long weekend up this way) to see if the Ham god's would smile on my QRP signal. On Saturday there was a CW contest in full swing which meant there was contesters with keen ears wanting to make contacts. On Saturday I setup at the same location I blogged about on Friday. The park located where we live was not too busy and I was able to scoop a nice picnic table. I was using the same setup the KX3 and mono band 20m whip mounted on my bike. I heard DL2SAX calling CQ test but I was not able to raise a contact from him. I did make contact with CO2RQ from Cuba who was in the contest. This contact told me my signal was getting out as up to this point I had not made any contacts with this setup. I then hung out at the QRP watering hole calling CQ there did not seem to be much action and I was beginning to wonder if Cuba would be the only contact. Then WL2LG came back to me, Len and I had a very nice QSO my report was 229 and I gave him 559. We had a nice QSO talking about antennas, rigs and weather. For Saturday that was it for my contacts.

A visitor 

On Monday I got out a bit later and the park was very active and finding a picnic table proved to be very challenging. The spot I had been at for the last couple of days was taken. I did find another spot about 15 minutes away from my first spot but again it was on the lake with a nice breeze. I setup and was on 20m in no time calling CQ at the QRP watering hole again. I did hear K4BBH and VE4AK but they did not come back to me when I sent out my call. I did notice on Monday the conditions had changed to the point where an S8 signal in no time was down at the noise floor. I did make one contact for the day with W2KJ, Joe was in North Carolina. He has a good signal that without warning would fade down to the noise floor. The Audio Peak Filter (APF) on the KX3 saved the contact for me as I was able to dig Joes fading signal to readable levels. We both were QRP at 4 watts and both of us were using Elecraft KX3 rigs. My RST was 329 and I gave him 559 and that seem to be it for my contacts for the day. I packed up and when back home satisfied with only one contact considering the conditions and my minimal setup.

Out on the trail with the KX3

The bike all loaded up

I had Friday off and it was a beautiful sunny day so it was time to take my KX3 out on the trail to see how my new bike/ham radio setup works. My goal today was to see how to fit all I needed and find out what I really don't need to take on my bike and to make sure my antenna setup worked. I wanted to have an enjoyable ride and at the same time have all needed to setup for portable operations on the trail. The antenna was my mono band whip antennas from 10m-40m. I have them in a nice nylon roll up canvas bag I found they fit just perfect on the bikes horizontal support frame. I also have 2 canvas carry bags mounted on the rear of the bike that can be removed. While also loading the side bags I came to the conclusion that less is more! I had to trim down on what I was bringing. First off my KX3 was in a Pelican case and the case has to go as it takes up one side bag Since the KX3 is a trail rugged rig and I have a protective face cover ( from GEMS) for my next trip the KX3 is not going in the Pelican case. I also found the binder I use would not even fit in the side bags so that has to be re-thought out as well. The binder I have now is nice as I put a small metal plate in it for my Palm paddle to secure too via it's base magnets.

After loading up the bike the first thing I found out was the kick stand on the bike would not support the bike and the loaded side bags. It turned out to be a fine balancing act when it

Diamond K400 mount

came time for setup making sure the bike did not tip over. Since the bike is brand new and I told the bike store what I was doing he wanted to see if this bike stand would work as it is lower profile. I was told if it was not doable then to come back and a more robust kick stand will be installed free of charge.
Here is a list of the items I am packing:
KX3-on it's own with no Pelican case
Extra battery just in case- The Tracer battery pack
18 gauge counter poise- only for 20m at this time
Pens, paper and 3x5 cards with programming Kx3 instructions
Headphones- I don't use ear buds as my hearing is not that great and any noise around me tunes out CW.
Trunk lip mount base for antenna- Diamond K400 
Miscellaneous items- antenna connectors, adjustable wrench, tire repair kit for bike, hat, sunglasses and so on.
Lets get to the trail adventure..........I was able to bike to one of my pre picked spots down at the Lake where a nice size picnic table was available. The antenna mount setup worked great on the bikes rear rack which I mounted back at the condo in case there was issues. I attached the counter poise via a male female 14 gauge connectors. The rig setup was straight forward as I have done this many times in the past. I fired up the rig  and I wanted to see at this point if the counter poise was sufficient for a decent SWR and it was. BUT after

The setup

the tuning process had finished and my KX3 display returned it returned with an error message "ERR TXG D=114. Never had I seen this error before on my KX3 but then again Murphy is always close by to make things interesting. I was not able to transmit at all so I was dead in the water........and I was even picking up a G4 station calling CQ! I got the Iphone out and Googled the error code and it came back that possibly a TX gain calibration was needed to be done. That was not a big deal as the Elecraft software utility does this automatically but the rig has to be at home to do this. The trail/ham radio outing had come to a grinding halt but that was just fine as I really accomplished what I set out to do and that was see how things packed up, transported and how the rig operated using the bike to mount the antenna on. Back at home I did the TX gain calibration and the same issue persisted. I went online to the Elecraft reflector and was advised that it may be my internal AA batteries were low. They were just charged I thought.........Julie informed me it was about 3 months ago that happened. I

The surprise error code

charged the unit and all is well. So today it's another great day and it's off to the trails again to hopefully make a contact or two.    

Part 2: What to bring for portable operations?

Now that I have some potential operating areas scouted out (with more to come as I do some more exploring) it’s time to look at what to bring

1. An HF radio……….DUH well of coarse……I’m bringing my Elecraft KX3 it has internal rechargeable batteries and you can plug in an external power source, internal antenna tuner, CW paddles attached to the radio, up to 15 watts of power thanks to the recent firmware upgrade but I will stick with 5 watts and many more portable friendly features.
2. The antenna……..I have chosen to use mono band whip antennas. I have the Workman HF whips from 10m to 40m and a great carry case for them. I’m able to Velcro strap them to the rear rack and to the front bar on the bike.
3. Spare external battery and I have already the Tracer 4Ah rechargeable battery. I was looking at other batteries but I figured “use what you already have”.
   
4. 3x5 cards with some of the common command functions of the KX3. Such things as setting up CW Keyer memories and playing them,memory setup and recall and dual watch if needed.
5. Bring some info on the contests that may be going on that day as I can scoop some contacts that are in a contest. It’s handy to know the exchange they are looking for in the contest.
6. Then there is the miscellaneous  stuff such as coax, pen, paper, cell phone and don’t forget bug spray, sun screen, sun glasses, water and a hat.
7. Make a list ahead of time that what to bring………there has been to many times to count when I thought I could remember everything only to find out I missed something and I was not able to operate because of it.

Part 1: Getting ready for outdoor operations.

April has arrived with not showers but a snow storm! We have had snow falling and accumulating all day today and it's forecast to snow most of the evening. To me it seems a good time as ever to think about my summer portable operations. A few weeks ago both Julie and I purchased new bikes and these bikes are amazing compared to our old ones. My plan this summer is to utilize my new bike for portable ham radio outings. My first step is to check out some areas in the neighbourhood were I can have my first few radio outings. I was looking for locations that would allow me to concentrate on my portable setup and workout the operational glitches. Each day I go out for a 40 min walk in and around the Lake we live on. These last few days while walking I was paying attention to spots that would be possible portable radio op spots. My criteria was close to home just in case something is forgotten, an easy ride to get there and sites that are easy radio setup and operation. This would allow me to work out the radio "stuff". Here are 3 locations I have scouted out so far......

This spot being right on the lake during a very warm day will have a nice cool breeze. Also if the sky is threatening rain I would have shelter to continue my operations.

This location is nice as it has a large bench to setup on but the weather will have to co-operate as it's out in the open.

Once summer arrives the trees at this spot will provide some nice shade plus it's a nice view to boot.

My CQ WW CW contest overview.

The QRP setup

I had a great part time effort in the CQ WW CW contest, I was not concerned with score or putting in a major amount to time in the contest chair. The key goals in this contest was to see how my CW reading by ear was doing and when on the rig to stay with it for the time I committed too. The reading code by  ear was fine up to speeds in around 25 BUT with some stations they were flying at around 35-40 wpm and that is just to fast. My code reader MRP4066 handled the high speed code no problem this software is not free but I found it to be the best! I entered the contest as single op, QRP single band (15m) and I met the requirements as a "classic" operator  I added this overlay to my submission. My total QSO count was 33 a score of 3,128 points and 10 zones. At my QTH I did not hear the usual amount of European stations I have in the past. My operating time was during the day from late morning to until late afternoon. During the late morning I head mainly Caribbean, African and some European stations but not many. As the afternoon approached more South and Central American stations came it as Europe faded.

I did have some "Murphy" moments such as…….I was not able to get my MFJ mag loop to tune at all at the start of the contest. Very quickly I found it was a very loose PL-259 connected on the rear of the loop's control box. Then for some reason N1MM+ set my CQ zone as 5 and not 4 and I did not click into this until about 10 contacts into the contest. Finally on the K3 there is a "test" setting and I use it to check macros without transmitting. Then old age had me forget to turn off the test mode, this found me thinking I was calling stations but was transmitting 0 watts….. Now that's QRP!!
Since I am operating QRP and using small MFJ loop antenna on the balcony my operating style was as follows
- I Use my VFO B to save a strong DX station that at the time has a huge pileup going. This stops me from wasting time trying to break the pile. Better to come back when the crazy pileup is gone. This worked great when I came across a Senegal station.
- Even when a station is at an S2 level but is just calling and listening my 5 watts can and did many times make it through for a contact.
- I don't use a spotting network as I found most of these stations have a huge pileup but I do have an Elecraft P3.  Using some hardware and software my P3 is seen on a 19 inch monitor and I am able to point and click on signals. My K3 then moves to that signal this allows me to see the activity on the band and Search and pounce these stations.
- When possible stay with a band such as 15m were my MFJ loop does not need to be retuned at all across the whole CW portion.
- Stick with my 250hz Inrad 8 pole CW filter so I can get between tight signals and only hear the op I want to contact.
In my post I am going to go into detail about my software I am now using and finding to be great for contesting and general QSO's It's now time to grab some eats and relax.

Out and about with my KX3 radio

The KX3 being used in my lap.

It's the Easter weekend and I normally get the Friday and Monday off work but this year I decided to also take the Thursday and Tuesday. Today was to be a great day with the temperature in around 17C the forecast was for sunny skies in the morning and early afternoon but then rain rolling in for later in the day. I decided early in the week that with the nice weather I was going to make today an outdoor radio day........well from the car just a bit muddy and wet to setup outside just yet. I took  my Elecraft KX3 and some mono band HF whip antennas that attach to a mount on my car. I set my sights on 15m and the conditions seemed great and the DX was rolling in. For the time I was on the DX contacts that I made were:
1. I1YRL from Italy and Luc was very strong and no fading what so ever. While talking to him I found out that in the summer of 2014 he and his wife visited Toronto. Luc gave my 5 watt QRP signal a report of 579. Luc was very surprised I was QRP 5 watts using a mobile whip from my car. 
2. EG90IARU/5 this was a special event  again they were booming in and I was able to make the contact on my first call. This was a very fast contact with the usual 599 report.
3. IT9NJE and Gene again from Italy gave me a 549 signal report.
Over all I was very pleased with my hour on the radio from the car out in the park. I was happy I did not have any Murphy moments but I did have an "old age" moment..................I installed the 15m mono band whip antenna on the car. For some reason (old age) I set the KX3 to 20m and could not understand why the antenna tuner was needed everywhere on the band! Then in occurred to me I was on 20m using my 15m antenna. Once that was sorted out the morning went very well.

KX3 troubles

A happy looking KX3

I decided to take the KX3 out and about on my day off Friday, it was an overcast day so I thought it wise to do my operating from the mobile rather than taking the bike. I set up the mobile whip antenna on my car and situated myself in the passenger seat and was ready to go.(note….this time before the trip out I made a list of things to bring so I was not without important items as happened in the past)  Brought the KX3 up to the 20m QRP watering hole (14.060) and just wanted to check the SWR on the radio before sending out my 5 watts of raw power. The KX3 gave me an error message but it seemed I was still able to transmit and I did for a short time. Then I noticed as I moved up and down the band my

Not so happy KX3

SWR stayed the same at 1.4:1 no matter where I was on the band….even up into the SSB portion. It was then determined something was wrong and I had a fast look at the antenna and coax but all seemed ok. I then switched to my 15m whip antenna and the error message was gone but I still had this strange low SWR across the 15m band as well. So it was time to pack things up and head home. Once at home I put the KX3 on a dummy load and tried it out and all was just the way it should be. I then put the rig on the MFJ 1788 loop and again no problems. So I suspect it's the mobile setup and I did post the problem on the Elecraft reflector and was given advice to check the mobile setup. When at home I did want to give the KX3 the full workout and to do so I started to call CQ on 20m. Terry WA0ITP came back to me from Iowa and our signals were in around 339 and conditions wee not that great but we were able to carry on a decent QSO. So the KX3 is working good but it's just another "project" I have on the burner that has to be worked out.  No time today as I am on call  this week and the phone has not stopped ringing with calls for me to go in!

Replacement rechargeable battery for Elecraft KX3

Tracer Battery kit

In a recent post I told the blog world about the failure of my KX3 portable power source. It was an external battery that was ordered from China. The battery  lasted under a year until it just failed to take a charge. The battery was only used maybe 6 times.  Not sure what failed but a fellow blogger  Larry W2LJ with the same battery had a similar failure as well.  It was time to get on the net and look for another external, compact and reliable battery. Plan number one was to avoid the products from China as I have learned a hard lesson there! Reading blogs of op's who operate portable and use an external power source (when the internal batteries give up the ghost) I came across a company called Tracer operating out of the U.S. To make a long story short I ordered from them and below are the spec's on the Lithium Polymer battery.

Closer look at the battery

- 12 volt  8Ah, weight is 600 grams (19.4 oz), charge time is 8-12 hours and carry case.

- Come with it's own wall charger and car adapter charger.  

- An LED battery charge status indicator. 

- A flate discharge curve. 

- Zero self discharge. 

- A tough ABS case

Status indicator light

Some operating time in the park.

The setup in the car

It was a great day today even though they called for rain  it was just overcast and very nice cool temps in around 17C. I was off work today and after I had completed the chores around the house it was time to get out in the outdoors for some ham radio. Since there was a chance of rain I decided to not set up outside and get rained out but instead I took my car and set up the Elecraft KX3 mobile from one of our near by parks on lake Ontario. I set out on my way and checked and double check all my items (last weekend I forgot   a coax connector and the portable op's came to a fast end) I arrived at the park around 13:00 local time and began to call CQ 20m I had no takers and decided to spin the dial to see who I could find. I did come across some DX stations calling CQ but was not able to be heard and some had very long waiting lists wanting to contact them. I then came across Bernie KB4JB from Florida and we had a very nice 20 minute QSO. The CW speed was in around 14 WPM and both of us were able to share station, location and other information before conditions changed and we both faded out. The KX3

20m mobile whip 

operated just fine for over an hour and a half on the internal batteries at 5 watts output. At one point during my QSO with Bernie for some reason my KX3 key was just not sending what I wanted. As time passed in our QSO I noticed my headphone cord was under the KX3 Key and causing the troubles. Once that was dealt with the code improved minus the headphone cord! I only made one QSO for the outing but it was a long one and the speed was at a very comfortable.  The antenna was a mono band 20m whip, the power was 5 watts from the internal rechargeable batteries and the radio as was mentioned the Elecraft KX3. It was time to head home and get dinner going for Julie's home coming from work.